Cette consultation se termine à 23 h 59 le :
26 septembre 2026
Résumé de la proposition
This proposal is for D. Crupi & Sons Limited located in Toronto, Ontario, to be registered under the Technical Standards Registry – Air Pollution (technical standards registry). This facility will adhere to all technical and operational requirements in the Asphalt Mix – Industry Standard under the Local Air Quality Regulation (O. Reg. 419/05).
Détails de l'emplacement
Adresse du site
176 Bethridge Road
Toronto,
ON
M9W1N3
Canada
Détails de l'emplacement du site
Industrial/Commercial
Carte de l'emplacement du site
L'épingle de localisation correspond à la zone approximative où a lieu l’activité environnementale.
Afficher cet emplacement sur une carte opens link in a new windowPromoteur(s)
D.Crupi & Sons Limited
85 Passmore Avenue
Toronto,
ON
M1V4S9
Canada
Détails de la proposition
This proposal is for D. Crupi & Sons Limited to be registered in the Technical Standards Registry – Air Pollution (Technical Standards Registry) in respect of the Asphalt Mix – Industry Standard under the Local Air Quality Regulation (O. Reg. 419/05).
D. Crupi & Sons Limited is an asphalt mix plant that produces paving asphalt and is located at 176 Bethridge Road, in Toronto, Ontario. The facility is part of a class identified the North American Industry Classification System (NAICS) code 324121, Asphalt Paving Mixture and Block Manufacturing. D. Crupi & Sons Limited is applying to register with respect to benzo(a)pyrene, metals, combustion gases, sulphur dioxide and nitrogen oxides; full list of requested contaminants is available for viewing.
Registration to a technical standard means that this facility must adhere to all technical and operational requirements in the Asphalt Mix - Industry Standard for benzo(a)pyrene, metals, combustion gases, sulphur dioxide and nitrogen oxides.
Technical standards ensure that facilities are managing impacts on an airshed by installing best available technology. These requirements replace the air standard for benzo(a)pyrene, metals, combustion gases, sulphur dioxide and nitrogen oxides for the facility.
Registration to the Technical Standards Registry is a compliance approach under the Local Air Quality Regulation. It requires that the company demonstrate compliance on an ongoing basis through applicable technical standard requirements set out in the Asphalt Mix – Industry Standard. Registration to the Technical Standards Registry does not exempt the facility from the requirements under section 9 of the Ontario Environmental Protection Act, which regulates alterations to plant infrastructure and processes. Therefore, a company required to install equipment under the Asphalt Mix – Industry Standard is still required to have approval under Part II.1 of the Ontario Environmental Protection Act for that equipment.
The Technical Standards Registry is available on the Ministry of the Environment, Conservation and Parks website and sets out the names of all facilities registered in the Registry.
Documents justificatifs
Consulter les documents en personne
Certains documents justificatifs peuvent ne pas être accessibles en ligne. Si tel est le cas, vous pouvez demander à consulter les documents en personne.
Veuillez communiquer avec le bureau mentionné ci-dessous pour savoir si les documents sont accessibles.
40 St. Clair Avenue West
9th Floor
Toronto,
ON
M4V 1M2
Canada
5775 Yonge Street
Floor 9
Toronto,
ON
M2M 4J1
Canada
Communiquer avec nous
Contact
Jeff Burdon
40 St. Clair Avenue West
9th Floor
Toronto,
ON
M4V 1M2
Canada
Commentaire
Dites-nous ce que vous pensez de notre proposition.
Vous avez des questions? Contactez la personne-ressource indiquée ci-dessous. Veuillez indiquer le numéro du REO de l’avis dans votre courriel ou votre lettre à la personne-ressource.Lire nos politiques relatives aux commentaires et à la protection de la vie privée.
Soumettre en ligne
Soumettre par la poste
Contact
Jeff Burdon
40 St. Clair Avenue West
9th Floor
Toronto, ON
M4V 1M2
Canada